![3-D rendering of building interior](https://lwsupply.com/wp-content/uploads/2017/05/benefits-of-bim.jpg)
“BIM in the Field”: 6 Benefits of BIM for the Contractor
If you work in construction, you’ve likely heard this term tossed around the past few years. Although the concept of Building Information Modeling (BIM) has been implemented in other industries for a couple decades, the concept gained popularity in the building industry in the past decade. In short, BIM is a multi-dimensional tool that uses data to generate and manage a model of a building in real-time using 3D, 4D, and even 5D modeling software. Much more than just 3D design, BIM is a process for creating and managing all of the information on a project throughout its entire life cycle—before, during and after construction.
BIM was created to be a shared knowledge resource for information about a structure, so the true value can only be realized when its taken beyond the design team and adopted in the field by contractors, subcontractors, and facility owners and operators. As a contractor, you may have seen BIM in a bid contract or on a job-site but aren’t sure of how it applies to you or what advantages it can bring you. Here we’ll outline six contractor benefits of BIM and how it can boost productivity, speed up the project, and save you time and money.
Clash Detection
One of the primary benefits of BIM for a contractor is clash detection, the process of finding where each subcontractors’ disciplines’ models “clash”: incompatibilities and inconsistencies, which would severely impact the construction process. “Clashes” can result in significant delays, design changes, material costs and budgetary concerns. In BIM modeling, clash detection takes place during the design phase so potential issues can be resolved before construction begins, saving time and money, while producing a better building.
Pre-fabrication
Off-site fabrication is becoming increasingly common in construction and offers many advantages including: cost savings, waste reduction, just-in-time delivery, improved quality control, and error reduction. BIM gives contractors the ability to envision a facility prior to its actual construction, which allows them to input important information before building begins and determine opportunities to pre-fabricate pieces off-site.
Job-site Delivery and Organization
BIM allows for integrated project delivery, resulting in reduction of costly construction delays, seamless and efficient coordination, increased cost control, and reorder rate reduction. Contractors in the field who have access to BIM can make better decisions in real-time about deliveries.
Phasing of Construction Process
Managing workflow is another benefit for contractors who use BIM in the field. They can identify opportunities for improving construction schedules, track materials and manage the supply chain.
Reduce Information Loss
BIM provides all parties involved in the building process with a single shared model to work from. This reduces information loss that can occur when a new or different team takes ownership of the project and ensures everyone is on the same page, saving time and a lot of headaches. Real-time changes can also be made, further eliminating confusion or delays.
Material Takeoff and Estimating
Contractors can use BIM models to do material takeoffs based on quantities or square footages throughout the life cycle of a project. This allows project teams to quickly generate cost estimates to support better design decision-making, and provide cost information about alternative designs, helping to curb budget overruns.
Just as we saw computer-aided design (CAD) replace conventional hand drawings, BIM is now the next evolution in construction and design. The prevalence of BIM in the field is growing significantly and will likely continue to do so. As with any technology that becomes mainstream, it’s important that each participant in a project build, including contractors and facility owners, can take advantage of its benefits. Contractors who have knowledge and experience with BIM can set themselves apart from the competition and, ultimately, help win the bid.
Interested in learning more about BIM software? Take a look at http://au.autodesk.com
*photo courtesy of www.usa.autodesk.com
![Downtown Yuma Image with Branch Manager Photo of Matias Arreola](https://lwsupply.com/wp-content/uploads/2024/07/yuma-az_matias.jpg)
L&W Supply Announces the Opening of Its Yuma, Arizona, Location
Matias Arreola manages the newest location CHICAGO – July 25, 2024 – L&W Supply, a nationwide distributor of interior building materials and construction supplies, has opened a new location at 2742 E 16th St., Yuma, Arizona. Matias Arreola manages the new location. Arreola has been a part of L&W Supply since 2008 and has held […]
![L&W Supply Announces the Opening of Its Lubbock, Texas, Location](https://lwsupply.com/wp-content/uploads/2024/06/lubbock-tx_gascho.jpg?t=1725147909&t=1725147909)
L&W Supply Announces the Opening of Its Lubbock, Texas, Location
Lance Gascho manages the newest location CHICAGO – June 13, 2024 – L&W Supply, a nationwide distributor of interior building materials and construction supplies, has opened a new location at 312 SE Loop 289, Lubbock, Texas. Lance Gascho manages the new location. With over 25 years of experience in the construction industry, Gascho joined L&W […]